Categories
Home Improvement

How To Resurface A Pool

Swimming pool surfaces deteriorate over time and you need to refinish your pool to keep it looking new and beautiful. You hire a pool contractor to resurface your pool. However, if you’re a DIYer, keep reading to learn how to resurface your pool.

When To Resurface Your Swimming Pool?

You may need to resurface your concrete pool every eight years. However, if you notice some deterioration signs like surface stains, cracks, coarse texture, loss of pebbles, and discoloration, you can schedule a pool to refinish sooner.

Step By Step Instructions For Resurfacing A Swimming Pool

Before starting, create an estimate of the project’s cost. Prepare a list of the items you need and go to a store where you can check the cost of all the items.

Prepare The Area

You will need to clear the area surrounding the pool. You should remove furniture from the patio and near the pool, electronics, and other pool accessories. Use weather-resistant dropcloths in the area surrounding the pool to avoid dust and stains.

Moreover, while the pool is filled with water, check all the features of the pool to make sure they are functional. For instance, if a filter is faulty, you should repair or replace it first before going ahead with pool resurfacing.

Drain The Pool

From the central pump of your pool, change the settings to drain so it drains the pool water. If the pool pump is not accessible or not working, you can use a small submersible pump to force water out of the pool.

Repair Damages

Get inside the empty pool and look for cracks and crumbling, and other types of damage. If there are a few small areas that need patching, you should do. However, if you see any part of the pool that appears as a bigger problem, you should let a contractor inspect the pool to advise what you should do about it.

Clean The Pool

For cleaning the pool, you should first remove things like leaves and stones by hand. After that, go ahead with pressure washing the entire pool surface. This should remove stains, mineral deposits, algae, and other things.

Keep in mind that you must be thorough with the cleaning because even if a small amount of dust or debris is left, it can cause problems in refinishing the pool.

Strip The Existing Materials

For plaster, fiberglass, and composite surfaces, you should use the method of sandblasting. Make sure to wear safety gear during this operation.

After completing the process, use a vacuum to remove dust and debris. After this, remove the clothes you used during sandblasting and take them to an area somewhere else where you can easily clean them.

Keep A Check On The Weather

For the project to go well, you should select days when there is no possibility of precipitation and gusty winds. This is because the materials you’ll use for resurfacing require some time to dry up and rain or wind can hurt that.

Select The Materials

There are many options for surfacing materials. To keep it simple, you can choose a plaster or fiberglass finish. They are also cost-effective.

For choosing a finish, choose a long-lasting one such as pebble, concrete, ceramic tile, or quartz. They will be less likely to allow stains and algae growth.

Epoxy Paint

Use an epoxy primer that is specific for pool surfaces and apply it to your pool. When it’s dry, brush on 3 to 4 coats of top-coat epoxy on areas that are difficult to reach. When applying epoxy, sand the surface before each coat.

Spread Plastic On The Pool Surface

Create the plastic mix by putting the dry plaster components and water in a big bucket. Mix the plaster enough to reach a thick consistency. Use a trowel to spread it on the entire pool surface.

Apply Fiberglass

Take a thin seal coat and cover the surface of the pool with this liquid using a sprayer or paint roller. After this, spray a coat of resin. Then, roll and sand the layers and let them dry. Basic epoxy paint dries within a few hours. However, plaster and fiberglass take many days to dry up.

Afterward, check the features of the pool like lights and plumbing fixtures, and refill the pool.

Conclusion

Resurfacing your pool can drastically improve the appearance of your pool and increase its lifespan. Consult pool builders Long Island for proper resurfacing of your pool.